'' Bad System Config Info '' is one of the bug check errors which indicates that the operates system encounters problem with a process. Just like other blue screen errors, you might get an idea of what the problem is by looking at the description.
The problem is most often related to a bad system configuration. However, there are wide range of reasons causing this issue. It is not an easy task to find out the exact reason for this error. While bad system config info seems complex to solve, it is relatively easy to fix. It doesn't require much technical knowledge.
In this article, I will be exploring about 7 Ways to Fix Bad System Config Info in Windows | Blue Screen of Death. Work though the solutions until your system boots up normally.
Let's get started,
1. Check RAM
Most commonly bad system config error is caused due to a bad hardware. Therefore, you have to make sure that all the hardware components are working properly. Initially, you need to check the RAM. To check issues with the RAM, there is a particular tool known as Windows Memory Diagnostics Tool Through this if any problems are identified, you will need to replace the RAM.
2. Check Hard drive
Similar to the RAM, a faulty hard drive can also cause this issue. Hence, it is worth performing a hard drive rectification too. First, you need to check for any physical damages in the hard drive. And then you must check if all the cables are connected properly. If the cables or the hard drive shows signs of damages replace them.
3. Update Drivers
The status of your drivers can also lead to this error. Especially, if you have recently installed any new hardware. The drivers which is not updated for a long time is prone to many blue screen errors. One such is bad system config info. Thus, to solve this you will need to access device manager. From there you can identify all the devices that is having issues with the drivers. With the '' update driver '' option the process can be accomplished. Or else, you can locate the drivers from the manufacturer's site.
4. Rebuild BCD
Another reason for bad system config error is the corruption of Boot Configuration Data (BCD) file. If the BCD file is not configured properly, it will deny access to the operating system. Probably in the form of a blue screen error. For this case, the only means of fixing BCD is using a windows installation media. And then from the BCD command.
To Rebuild BCD,
- Insert the installation media
- Restart the PC
- Boot from the installation media
- Choose your language
- Press Shift + F10
- Type the commands (Press Enter after each command)
bootrec.exe /Fixmbr
bootrec.exe /Fixboot
Once typed restart the PC.
5. Fix Registry Issues
Windows Registry is a database which stores configurations related to the systems and operations. This registry is directly responsible for the computer boot process. Usually corruption in the windows registry can contribute to this error. Therefore, by repairing the windows registry you are essentially eliminating this error. Generally, the windows registry can be repaired with the help of some command lines.
6. Perform System Restore
The System Restore process reverts your system to the point of time before the error started appearing. However, you need to have restore points created to try this. If you have this feature turned on, the windows will automatically create restore points. Otherwise, the restore points must be manually created after some time.
To Restore System,
- Insert the installation media
- Restart the PC
- Boot from the installation media
- Choose your language
- Select troubleshoot
- Select '' System Restore ''
7. Reinstall Windows
If all other methods fail to fix this error, then the PC has to undergo reinstalling windows. The way settings and configurations will be rolled back should essentially avoid bad system config error. Once this process is initiated it will delete all the files in the C partition. Due to the risk of loosing data, it is necessary to have suitable backup.
No comments:
Post a Comment