Fix The File is Possibly Corrupt the File Header Checksum Does not Match the Computed Checksum

The file is possibly corrupt is especially a common error experienced by the users when they try to install a new theme or a new operating system on their computer. It restricts process of booting by not allowing you to access the system. Even you will not be able to access the BIOS. However unlike a single black screen, this error tells you specifically what is it about. Therefore, by implementing the right measure you can successfully boot your computer at the normal process.

In this article, I will be mentioning about Fix The File is Possibly Corrupt the File Header Checksum Does not Match the Computed Checksum. Whatever the operating system you use, Windows 7, Windows 8 or Windows 10 this can be used effectively.

Let's get started,

1. Change boot order

Certain settings present on the BIOS allows the user to select from which device the computer has to boot. It can be a CD/DVD drive, floppy disk drive or a hard drive. This is a specific order in which the priority is decided for booting. This sequence is known as the Boot order. 

The first device on this list will be the initial one where the boot process takes place. If your computer fails to recognize the CD/DVD drive then try changing the boot order CD/DVD drive first. And then perform the startup repair.

To change the boot sequence,

         1. Start the computer
         2. Press the Esc key
         3. Navigate to the boot tab
         4. Change the order
         5. Press F10 to save and exit

2. Remove RAM

Since RAM is not mechanical, it typically has a longer lifespan. It has the capability to last longer than any other component in a computer. That is the reason why RAM manufacturers are offering longer warranty periods from the RAM. Most RAM sticks comes under lifetime warranty. 

Although with these under very rare occasions the RAM can go bad. When this happens the computer may be displaying this error. However most PCs often have more than one RAM. Try restarting the PC with only one RAM stick. Do this until you identify the defective one.

3. Run Chkdsk

Sometimes the reason behind this error can be the bad sectors present on the hard drive. This can occur due to physical damages caused to the hard drive or else as a result of data that is written badly. For identifying the bad sectors on the hard drive, you have to run Check Disk Utility (chkdsk). 

Chkdsk necessarily scans your hard drive looking for bad sectors. However this cannot be done directly. You have to connect the drive to another PC with good working condition.